However, for some time, this method of domestic heating was safely forgotten. There are several reasons. First, both then and now many believe they are not tested and, therefore, unreliable technology. Secondly, floor, although it is not too difficult, however, requires some effort to study it. Third, quite a few people who really know how to do everything, and that can translate their knowledge into action.
A pity, because the technology is good. Although, no doubt, it has some shortcomings, but still "pluses" so much more!
Immerse yourself in the history of the creation of water floors, it should be noted that they were invented in the 20's of the 20th century. And at the same time in the UK and in France. Over time, the advent of plastic pipes and their installation is much easier. This kind of heat began to enjoy increasing popularity. However, in view of the fact that in the Soviet Union, the plastic pipe industry in technology and have not received widespread adoption, then, as mentioned just above, the special water distribution and the floors are not purchased.
Therefore, domestic consumers currently have to rediscover this so-called "novelty" in heating their own homes.
The narrative should start from the time when the heating system will be attached to the floor slab. And, above all, is to analyze the essence of the system under study. For example, before actually installing the pipe is laid at least one layer of insulation material. Then you are ready to install them. Most preferred in this case will the use of plastic products 20 mm and a wall thickness of 2 mm. The distance between adjacent parallel paths formed by the pipeline should not be too different in either direction from 300 mm. The depth of laying should be taken in the heat of the fluid and the features of the surrounding material (sand, for example, or concrete screed).
Adhering to these guidelines, each person will be able to make the most of the impact of the water heating floors. In general, Radiant Floor hands - a task which is on the back to everyone!
Technology laying water floor heating provides for the implementation of one of the benefits of its use - saving space and energy. The first is quite obvious, since, unlike the majority of other heating systems, this does not require the use of the useful part of the room in which it is mounted. At the same time, to show evidence of heat savings, it is necessary to recall the school physics course, certain parts of which state that the heat from their own source of rising perpendicularly upwards. Accordingly, if the aforesaid power, and in our case the water heater wood floor (though not necessarily specifically wood), is located at the bottom of the heated space, each cubic meter of space will be heated in the shortest time, receiving a number of evenly distributed heat.
As a consequence, the calculation of water underfloor heating is an integral component of the implementation of which can dramatically affect the final result of the work produced. In the exercise of the right measurements and calculations of the heat immediately after the system has increased almost by 60%.
Heated floor, thus created, makes any home more comfortable. As a result, despite twenty years of a break in the history of the implementation of the presented technology in countries that were once part of the USSR, the new more concrete steps towards its renewal and then continue starting to make many of our fellow countrymen now. Moreover, a considerable number of them are trying to do everything with my own hands!
Warm floor hands of professionals
And here is the first question that must be confronted by anyone who decides to realize for themselves and their own family this project, is the meaning of the independent work. In many cases, preference is given to self-employed professionals, which, of course, faces a large one-time expenses. But it should be borne in mind that they will do their job and once. That is not to be costs associated with the alteration of a marriage that any non-professional workers can avoid for various reasons.
Warm floor with his hands
And yet ... In the case of self-laying of pipes in concrete floor the following sequence of actions. First, as already mentioned, the "rough sex" should be evenly and gently laid a given thermal insulation material. Best of all may be suitable for this role, foam or Penopleks. Secondly, on top of the material placed mesh reinforcement. Third, the top of it is a spiral laying of water pipes with suitable functions assigned to them characteristics. Fourth, one end of the line formed by the collector is fixed in supply, and the other - in the output. The fifth step involves conducting a test run of the established system. The water in it must be made under the pressure of about one and a half times the expected level of his work. If the test is successful, you should move on to the implementation of the sixth step - laying sand or concrete screed.
One of the main factors that will be considered absolutely professional during the installation work, and which is quite a lot of cases, for some reason overlooked by others, is the choice of the manufacturer underfloor. Quality assurance in use in the case of materials plays an important role. And it can give only those companies who for years defended its place under the sun, very choosy consumers favor. As a few examples are the German manufacturers «Kermi» and «Oventrop», as well as Swedish - «Uponor». Their products have been tested by many generations and will never become a cause of a failed installation of water-heated floors.
In the end it is worth noting that this article only covered basic problems must arise in the process of creating the view systems. Particularly important is the painstaking study of the specialized technical literature that describes quite a lot of the nuances of the proposed operation, carried out even in the preparatory stages of their conduct. This allows even a layman to avoid many stupid mistakes, turn around in the future, significant enough expense.
Комментариев нет:
Отправить комментарий