Alignment plasterboard walls

The very name of the text speaks for itself, repairs in the apartment always touch the wall. Most people plastered their old ways by various cement mixtures and solutions, and the most prudent people who value their time and money has long since started using the latest methods. This is because the walls with their hands is much easier and faster. Moreover, this method is used with the least pollution and costs, which is very important, especially if the floor does not need to be changed, or when people are living in this room.


Everyone loves a perfectly flat wall, such a result can be achieved by using the alignment of plasterboard walls with their hands. Thanks plasterboard wall surface will have a beautiful view and the state, in addition to not have to remove the existing coating. Consequently, the time and money in substantial savings.


In order to equalize the plasterboard walls must be well consider the following elements:

First, the need to accommodate sockets;
second, whether the additional load on the cover or not. If so, you need to determine exactly where;
thirdly, the need for additional insulation in the room itself;
Fourth, whether to put itself on top tile. All further actions will depend on all of the above criteria.
Storage drywall.
Many people are interested in the correct alignment and literate plasterboard walls that he would not finish after walking and sailing. One of the special conditions to possess. In case if you do tie on the floor normally, in no case be allowed to stuff in the room, where it manufactures tie. Since he types the moisture and can later cause problems.

Frame for plasterboard.

Most of the alignment quality plasterboard walls is very dependent on the frame. Framework required for the device profiles of different types of metal, as a guide, rack and corner. Some are designed to minimize the distance between the walls and the gypsum board, used for this ceiling profiles, it is considered improper. Such actions are completely violates human mounting structures. That is, to such effects as irregular slope, walking and so on.


Drawing.
Originally created by drawing a future frame, then do the exact markings on the walls and ceiling. It is necessary to pay special attention to the ceiling, if it is aligned well as walls, the upper edge should stand back and not be available at 6 centimeters.

Installation of drywall.
After all of this must be mounted design of the profiles. The walls of this structure must be attached plugs. If the ceiling is more than three meters indoors, it does not necessarily need to use a three-meter long profile, and cut four foot profile. The technology requires a design of such rules.

Cut the sheet gipsakartona special construction sawing holes for electrical outlets and switches to hold the wires to the frame and mount with screws and screwdrivers. This is the core install drywall on the walls.

Once the alignment was done with his own hands gipsakartona plastering the walls with your hands and make the finish preparing walls for wallpapering.