As most to insulate wooden windows

Probably, every family has its own method of warming some windows. And your not the exception. However, once you learn some new and interesting method, then take advantage of them with pleasure. This article is an example of a less common, but effective method of insulating windows.

This method for the proposed technology is quite different from most known variants due to its high efficiency. So, you should prepare all the materials: special window film, sealant and sealant.

Insulation technology

The sealant is suitable for such a process. Regime of temperature when working with the material should not go beyond the +5- +40 degrees Celsius. First of all, clean the frame and the glass from dust and dirt. The surface must be dry only. To apply, use a special sealant gun. On a tube of sealant is a nozzle which should be cut on the label, and then set the same gun and apply a coat of sealant into the grooves between the frame and the glass.

Wait until such time as the sealant hardens, and even then it can clean traces that may fall into the wrong place, where you want. To do this, use common office knife. From the outside you need to apply to silicone glazing beads, and then secure them to the frame. Insulation of the frame is complete.

Compactor

Many of the seals, which are presented in the market today vary different parameters, such as shape, material, or even the type of attachment. During work on warming windows. Before actually installing the seal you need to clear the place of installation of dust and dirt, then dry it. Next, lay the gasket on the surface and gently pushed him down to the ground, but do not forget that the seal can not be stretched. Now, the window or balcony will be ready for the winter frosts.

Heat-insulating film for windows

Such a film does not stop a lot of the visible light spectrum, but can reflect up to 90% of infrared radiation. This material retains heat well, which goes out of the room, and returns it back to the room in the form of radiant energy. Remember, to work with such a film very carefully, because its surface is simply unacceptable appearance of grease on the fingers, as well as dust and dirt.

Window film two different parties that need to clearly distinguish not to reverse during the bonding film on the glass. One of these sides - Electrical. When you set up a film, it is necessary to put in the conductive side of the glass. How to define it? Very simple - to "metallic" luster of the surface.

Remove the window frame dimensions and do not forget to leave a small reserve to install fasteners. When you apply a film on the window frame, align it, and then fix the double sided tape directly on site. If you do it carefully, the film is almost invisible and home repairs will be fine.