Well of his hands

In ancient times, water was seen in nature, like life itself, an inexhaustible zhiznennyyistochnik. Highly respected and appreciated people who could find a clean, suitable for pityavodu and dig a well.
Before choosing a place to settle, our ancestors found the area with water. Choosing a place lozohody. They found vines with drinking water. At this point, dug a well and settled around.
I do not know if we formed a Russian village thanks to the well of drinking water, but with the technology that was used in our village, I also did well in his country house and now I am dependent on a well with a pump, when electricity is cut off in the area.
Well of his hands, we do so:

Manufactured conical timber forms. The best option - is to find a good-sized wooden barrel, upholster it inside two straps, and then remove the hoops. We obtain formwork, folding inward. To fix the formwork in position inside installed two hooks.

Excavated cylindrical groove diameter slightly larger diameter casing wide base and a height slightly less than the height of the formwork, all-round deepening install metal fittings (made of hand-picked at the dump rods, bars, wires, etc.)
In deepening falls minimized formwork, turns and locked in the deployed position wide base down.
The space between the walls of cavities and formwork is filled with concrete.
After hardening of concrete formwork fold and taken out of the groove.

Again scooped recess install fittings, sinks into the recess formwork, the space is filled with concrete, etc.

When the depth of the well reaches the required level, proceed to the registration of the upper part of the well (install gates, shed, etc.) and finish the job.
All phases of work are clear from the figures.
The advantages of our technology
A minimum of materials, tools, and strength.
Ledges rings are the steps for the descent and ascent.
Safety.